Table of contents:

Making colorful stepping stones for the garden with mosaic stones and concrete
Making colorful stepping stones for the garden with mosaic stones and concrete

Video: Making colorful stepping stones for the garden with mosaic stones and concrete

Отличия серверных жестких дисков от десктопных
Video: Make DIY Concrete Mosaic Stepping Stones for the Garden, Ep 37 Fridays w/Flora 2023, February
Anonim

Stepping stones not only enrich the garden visually - you can also get from A to B with clean shoes. Instead of buying expensive stones from the hardware store, you can easily water your own stepping stones and design them individually. We explain how it works.

Table of contents Table of contents How to pour colorful stepping stones for your garden

  • You need that
  • Step 1: form circles
  • Step 2: lay the pattern
  • Step 3: clean plates
  • Step 4: lay stepping stones
  • Extra tip

Table of contents Table of contents How to pour colorful stepping stones for your garden

  • You need that
  • Step 1: form circles
  • Step 2: lay the pattern
  • Step 3: clean plates
  • Step 4: lay stepping stones
  • Extra tip

Self-made stepping stones made of concrete are not only an inexpensive alternative to conventional slabs, but can also be decorated individually. The stones look particularly beautiful decorated with mosaic stones or broken glass. Our step-by-step guide explains how it's done.

You need that

  • sand
  • Trass cement
  • Flower pot coasters in the desired size
  • Mosaic stones, broken tiles
  • neutral vegetable oil (or silicone spray)

Step 1: form circles

Mix as much concrete in a bucket as you can process in an hour. A drill with a mixing attachment is suitable for mixing. Two thirds of sand and one third of trass cement is recommended for the mixture. Then add enough water to create a quark-like consistency. Then you should oil your flower tote coaster with vegetable oil to make it easier to remove it later. Once all the preparations have been made, the concrete can now be filled in at least five centimeters thick.

Beton einfüllen
Beton einfüllen

Mix the concrete and fill it at least five centimeters thick.

Photo: www.bine-braendle.de

Step 2: lay the pattern

While the concrete is still damp, you should press the decorative material into the concrete. Be sure to countersink the mosaic stones deep enough to avoid the pattern breaking out of the stepping stone.

Trittsteine verzieren
Trittsteine verzieren

As long as the concrete is still moist, you can decorate the surface as you wish.

Photo: www.bine-braendle.de

Other do-it-yourself instructions

Mosaik-Eingang
Mosaik-Eingang

Garden design Create your own mosaic in the garden

Hollywoodschaukel
Hollywoodschaukel

DIY & Repair Building instructions for a swing swing with swing

Step 3: clean plates

Once the concrete has set, the mosaic can be cleaned with a sponge. The stepping stone should remain in the mold for about 24 hours to guarantee the required stability.

Trittsteine putzen
Trittsteine putzen

Has the concrete dried completely? Then you can carefully clean the surface with a sponge.

Photo: www.bine-braendle.de

Step 4: lay stepping stones

When the concrete is completely dry, the slabs can be removed from the coasters and laid out in the lawn to match the stride length. To do this, dig out holes about ten centimeters deep in the respective size, fill in five centimeters of sand and tap on them. Insert the kicks and press them until they are flush with the turf. Ideally, you should wait about two weeks before using the new route.

Trittstufe herauslösen
Trittstufe herauslösen

As soon as the concrete has dried completely, you can carefully remove the step from the mold.

Photo: www.bine-braendle.de

Extra tip

Decorating the concrete slabs is reminiscent of topping fruit cakes. You can even apply a glaze. Simply rub the plates with a little salad oil and they shine in a wet look.

Popular by topic