Table of contents:

Wallpapering with non-woven wallpapers: This is how they stick perfectly
Wallpapering with non-woven wallpapers: This is how they stick perfectly
Video: Wallpapering with non-woven wallpapers: This is how they stick perfectly
Video: HOW TO INSTALL WALLPAPER LIKE A PRO : START TO FINISH TUTORIAL 2023, February
Anonim

Since the base of a non-woven wallpaper is extremely stable, the wallpaper web does not contract when it dries. It is relatively easy to paper a non-woven wallpaper. DAS HAUS explains how you can glue non-woven wallpaper clean with small practical tips.

Table of contents Table of contents Wallpapering non-woven wallpaper: Instructions and practical tips

  • The most important things at a glance
  • Wallpapering non-woven wallpapers: the right paste
  • Instructions: Wallpaper non-woven wallpaper explained step by step

Table of contents Table of contents Wallpapering non-woven wallpaper: Instructions and practical tips

  • The most important things at a glance
  • Wallpapering non-woven wallpapers: the right paste
  • Instructions: Wallpaper non-woven wallpaper explained step by step

The most important things at a glance

  • Non-woven wallpapers are easy to apply, so that you can easily achieve clean results.
  • A non-woven wallpaper does not have to be pasted. It is simply applied to the pre-pasted wall. This requires a special paste.
  • Non-woven wallpapers can be glued directly onto the pasted surface without soaking times.
  • The material of a non-woven wallpaper remains stable even when damp, so you can cut the wallpaper directly on the wall.

Wallpapering non-woven wallpapers: the right paste

To paper non-woven wallpapers, you need the right paste. This has a special adhesive power because it contains special adhesive reinforcements. This is necessary because a non-woven wallpaper is comparatively heavy and would otherwise slide off the wall.

You can also use special non-woven wallpaper paste for other heavy wallpapers, even if they are not non-woven wallpapers. This applies, for example, to textured wallpapers, vinyl wallpapers, textile wallpapers, embossed wallpapers or woodchip. This does not work the other way round: normal wallpaper paste is unsuitable for non-woven wallpapers.

Image
Image

Wallpaper wallpaper paste with coloring for non-woven wallpaper

If you do not have much experience with wallpapering, you should follow a tip from experienced do-it-yourselfers and choose a non-woven wallpaper paste that colors the wall when pasting. In this way, you will surely succeed in covering the entire area evenly. You don't forget a corner and don't apply too much paste anywhere. By the way: The color disappears as soon as the paste has dried.

Instructions: Wallpaper non-woven wallpaper explained step by step

With our instructions, sticking non-woven wallpaper is easy to master even for beginners. First make sure that the wall is prepared: The surface must be clean, dry and dust-free. You don't need an absolutely smooth surface, small holes and cracks reliably cover the robust non-woven wallpaper. The preparation with a suitable deep primer or wallpaper primer must be done in advance like with any other wallpaper. You should also disassemble skirting boards, sockets and light switches. If you paper non-woven wallpaper yourself, you need the following materials and tools:

  • Wallpaper base
  • Non-woven wallpaper
  • Wallpaper paste for non-woven wallpapers
  • Mixing buckets
  • Stir bar
  • Tassel or paste roll
  • Wallpapering table
  • Cover film
  • Painter's tape
  • Decorating scissors
  • cutter
  • Decorating rail
  • Wallpapering brush
  • Foam rubber roll
  • Folding rule
  • pencil
  • Spirit level, Lot
Tapezierutensilien
Tapezierutensilien

Before you start wallpapering, you should have all the materials together.

Photo: iStock / Photomotive

Step 1: apply wallpaper base

Use a tassel to apply the wallpaper base to the prepared wall. This improves liability. Follow the instructions exactly and adhere to the drying time. You can then mix the wallpaper paste.

Step 2: Measure the first sheet on the wall

They start at the brightest point and paper away from the light. In this way you avoid any shadow gaps. Measure the first path on the wall. Don't forget the overlap areas of the wallpaper above, below and on the side towards the end of the wall. Now mark the web width directly on the subsurface in several places and connect the dots vertically with a spirit level to form a vertical line. Hold the plumb line against the drawn line again to check it. Then cut the first sheet to the appropriate length, taking into account the respective addition. Use the paper scissors as a tool, not the cutter. This would damage the wallpapering table.

Step 3: Apply paste for a sheet on the wall

Now paste the wall for the first layer. Apply the paste generously so that you yourself have some time to align the web vertically. The first course is the most important, because the following courses are based on it.

Step 4: apply non-woven wallpaper

To press on the non-woven wallpaper, you need two tools, namely the wallpapering brush and the foam rubber roller: Use the wallpapering brush to press the wallpaper in even strokes first in the middle from top to bottom, then to the side against the wall. If the membrane is perfectly straight on the wall, grab the sponge rubber roller and roll up the non-woven wallpaper. Now press the wallpaper into the corner on the floor and under the ceiling and, if necessary, on the adjacent wall. Use the cutter to cut off the excess.

Image
Image

Step 5: paper the next strip

Cut the next sheet to the correct length and prepare the surface with the paste. Lay the membrane parallel to the first membrane so that they are abutting against each other. Now process the web as described in the instructions in step 4, first with the brush, then with the foam rubber roller. Shorten the excess with a wallpapering bar and cutter knife.

Image
Image

Practical tips:

  • You prefer not to use the old seam roller with a corrugated surface. These leave unsightly corrugations on the wallpaper. If you want to use a seam roller, use a conically shaped specimen with a smooth surface.
  • You can also paint a non-woven wallpaper and design your home individually.

Marion Rohwedder

Popular by topic